Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$22.00
Very soft special wax with low melting point. Ideal for base cleaning and use as basic care of new skis - Penetrates very deep into the base - Biodegradable - Resealable wax case - Base cleaning: Wax the base and remove again while the wax is still warm. Snow temperature recommendations: - Yellow 32F to 21F - Red 25F to 10F - Blue 14F to -22F
$15.00 - $20.00
Universal liquid wax for cross-country skis/ especially also suited for skis with a mechanical climbing system (fish-scale skis). For all kinds of snow and temperatures. - Based on natural raw materials - Biodegradable - Improves sliding properties and cares for the base - Quick and easy to apply - With sponge applicator and integrated polishing felt - Comfortable pocket size to go and wax en route No shipping to Alaska (please buy locally). - Comes in 100 and 200ml sizes.  100ml size comes with polishing pad. No shipping to Alaska (please buy locally).
$10.00 - $22.00
Universal liquid wax for all types of snow and temperatures. - Based on natural raw materials - Biodegradable - Improves sliding properties and cares for the base - Quick and easy to apply - With sponge applicator - Comfortable pocket size to go and wax en route - Also used as rust protection for ski edges No shipping to Alaska (please buy locally). - Comes in 75/ 100/ and 200ml sizes.  100ml size has polishing pad. No shipping to Alaska (please buy locally).
$10.50
Fibertex is a mat made of nylon fibers, which is mixed with fine abrasive particles to smoothen the base. The kit includes 3 different mats: - Light brown: For gentle deburring on new skis or newly stone ground skis before waxing. For refreshing base without disturbing structure. - Dark brown: To be used before waxing to remove oxidized layer to open base. - White: For polishing after waxing and brushing.
$15.00 - $18.00
For use in hard wax conditions when classic skiing. Practical packaging: the wax can be twisted out like a deodorant stick enabling the waxer a good grip on the wax and the ability to use all of the product. - Yellow for snow temperatures 0C- -2C (32F-28F) - Red for snow temperatures -2C- -10C (28F-14F) - Blue for snow temperatures -7C- 30C (19F- -22F) - XCold for snow tempertures -12C- -30C (10F- -22F) - Base Green is a binder and makes what you put on it last longer. It can also be very good by itself in some conditions.
$15.50
The Toko Nordic Klister Spray Base Green 70ML is a highly effective grip spray for fast, clean and lasting grip and extreme adherence.
$22.00 - $50.00
Performance Hot Wax for racing and training/ fluorine free - Yellow for wet conditions (Snow temp 32f to 21f) - Red for medium conditions (Snow temp 25f to 10f) - Blue for cold conditions (Snow temp 14f to -22f)
$34.00
Liquid paraffin wax at the performance level for racing and training. Snow temperature recommendations: Yellow: 32F to 21F Red: 25F to 10F Blue: 14F to -22F
$7.50
Synthetic cork for corking Grip and Klister waxes.
$12.50 - $99.00
Fluor Free Hydrocarbon wax -5°C to -10°C. Good training wax in cold condition. Easy to warm in. Good in dry conditions. - An undisputed favorite in cold conditions - Hard and durable, yet easy to apply - A favorite both in alpine and XC Temperature range from -5°C to -10°C (23°F to 14°F). Recommended iron temp.: 145°C (293°F). Our std. CH6 has been a success in the Cera Nova system, and through comprehensive testing we have not found anything better. It is an economic training and racing wax as well as a base prep wax for cold skis. CH06X has high durability and offer great performance in most snow conditions as well as on artificial and glacier snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax.
$20.00
F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application
$18.00
Large roll, 40 m. Swix Fiberlene is a lint-free, fine fibrous towel that is ideal for cleaning ski bases rather than using paper towel. Swix Fiberlene Cleaning Towel will not tear as easily or rip because of its stretchable material, even when used with a solvent. Great for removing leftover dirt and excess wax.
$38.00 - $40.00
Gives faster skis. Cleaner & conditioner glide sections of racing skis and snowboards. - Ski Cleaner for glide zone. - For everyone who waxes their skis. Cleaner for fluoro glide wax and CH-wax. Improves glide and conditions the base. For glide sections only on all racing skis and snowboards. Involves no hard mechanical treatment of the base. No wearing of the stone grind pattern in the ski base. Makes the ski faster! Apply cleaner (I84C) with Fiberlene. Brush with white nylon brush while wet. Wipe clean with Fiberlene. Let dry for 5-30 minutes. Brush with hand steel brush (or Roto steel brush). Wax with Base Prep wax. 16.9 fl. oz.
$44.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions. How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. Features: - Fantastic for warm conditions - Improves ski glide - For training and racing - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions
$48.00 - $300.00
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).
$48.00 - $300.00
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions
$120.00 - $300.00
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$48.00 - $300.00
A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$27.50
Ski cleaner for cleaning ski bases and removing wax and klister. First remove as much wax as possible using a scraper. Dampen a piece of Fiberlene with ski cleaner and rub until the wax/dirt is dissolved. Wipe with dry Fiberlene. The active ingredient in this liquid ski cleaner is low-aromatic hydrocarbon, which has a good effect on grease and dirt. The aerosol has a long shelf life and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless.
$24.00
Superior durability! Baseklister in the KX series, for all conditions. For enthusiasts and racers, great durability. Base klister for cold and warm conditions. To be used as the first layer for better adhesion of other klisters to the base. High wear resistance on ice and hard coarse snow. Always apply indoors with a waxing iron appr. 110°C (230°F). Only cover the sanded grip zone. Heat the tube slightly for easier application. By “edging” the waxing iron you get a controlled equal distribution of the klister. Scraper included.
$18.00 - $120.00
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply
$18.00 - $120.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$18.00 - $120.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).
$18.00 - $120.00
PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).
$5.50
Practical pencil scraper for removing glide wax from the groove on cross-country skis.
$7.50
Used for scraping after hot waxing A thicker scraper with less sagging is best for a structured gliding surface.
$30.00
Rectangular medium bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. 10 brush strokes recommended.
$27.50
Protects integrated skins from icing and improves glide properties. Recommended maintenance for skin skis to extend their life span and get a better ski experience. To be applied before skiing. Highlights: - Boost the perfomance of skin skis - Easy to use - Apply before skiing - Must have when using skin skis - Fluoro free ski wax - Swix ski wax - Made for Cross Country Skiing *Danger: Highly flammable liquid and vapour. Causes serious eye irritation. May cause drowsiness or dizziness.
$27.50
Cleans integrated skins in a gentle way without affecting the skin glue. Restores the properties of the skin and increases its efficiency. To be used after skiing. - Can also be used for backcountry skiing - Easy to use - Apply after skiing - Must have when using skin skis - Fluoro free ski wax - Swix ski wax
$24.00
Developed to protect integrated skins from icing and to improve the glide properties. The risk of icing is in particular present around zero Highlights: - Skin ski impregnation - Apply before skiing - Must have when using skin skis - Fluoro free ski wax - Swix ski wax
Page 1 of 3 Next page