There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
$6.50 $12.99 50% Off
This extra-large, 40-gram threaded air canister packs as much volume as two 20-gram cartridges with half of the weight while boosting available pack space. - Inflator operates at temperatures above 40 degrees Fahrenheit - Canister contains propane for lighter canister weight and increased gas volume - Propane does not affect tubeless sealant - Canister must be used with nozzle facing down - Fits 3/8-inch threaded inflators with 5mm depth from pin to edge of threading
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
Lezyne's easy-to-use Alloy Drive CO2 is super-compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with all threaded cartridges. - CNC-machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges (sold separately)
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable, and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 25g cartridge
$28.99 - $29.99
Lezyne's lightweight, powerful HP Drive mini-pump quickly inflates your road bike tires so you can get back to pedaling. Its aluminum barrel and no-slip Carbon Matrix handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use. - Small: 170mm, 77g - Medium: 216mm, 90g *Note: Blue color not available in the United States
Lezyne's Micro Floor Drive HV is a powerful mini-pump that thinks it's a floor pump. Its fold-out foot peg, high-volume barrel and aluminum construction make it easier than ever to pump up to maximum pressure of 90psi and get back on the trails. You'll also appreciate the ergonomic handle, extra-long hose and Presta/Schrader-valve compatibility.
The Sport Floor Drive floor pump features a steel barrel and piston with a tough composite matrix base for years of reliable use. Its oversized 3.5-inch gauge makes reading the pressure a breeze. - Extra-long, high-strength hose with composite matrix couplers - Durable, painted finish with varnished wood handle - Standard height - 220 psi max
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
Combine the best elements of all of Blackburn's mini-pumps and what do you get? The Core CO2'Fer Pump. The Core CO2'Fer is an excellent stand-alone mini-pump that adds the versatility of an integrated CO2 inflator and the peace of mind of a Presta valve tool, ensuring nothing goes wrong when all you need is an inflated tire. A remote inflation hose takes unwanted stress off the tire valve. - Removable CO2 inflator - 120 PSI - Thread-on Presta/Schrader - Retractable hose - Removable Presta valve core tool - Includes 16g cartridge, frame mount, CO2 strap
The pull-out hose puts less stress on the valve. And you weren't stressed to start with. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. Blackburn's Presta-only head sits on a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Thread on pump head automatically adapts to Presta valves - Rebuildable internals parts available aftermarket - Flexible hose - Includes Presta valve tool - Frame mount included - 120 PSI, 8.2 Bar maximum - Weight: 127 grams
Blackburn's CO2fer Mini-Pump is a cleverly designed and fully functional mini pump that allows a CO2 cartridge to stow away inside and that can be quickly rearranged as a CO2 inflator. - Mini pump designed specifically for mountain bikes with 50 psi maximum - Blackburn 16g threaded CO2 cartridge included - 191g / 0.42lbs
Easier than ever to use, Blackburn's Outpost HV AnyValve mini-pump offers a solution for efficiently inflating fat bike and plus-size tires. - Largest air volume mini pump on the market - High/low pressure switch allows for easy inflation up to 80 psi - Material construction proven to work smoothly at temperatures as low as -40°C - TwistGrip valve head design makes operation easy while wearing thick gloves - AnyValve head works well on Presta, Schrader, and Dunlop valves - Mounts to frame and fits inside ride pack or frame bag
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Mounting Kit for Mountain Morph and Turbo Morph G.
Topeak's JoeBlow Fat is the first floor pump exclusively designed for low pressure fat tire bikes. The massive oversized barrel is 1.5 times larger than standard floor pumps and delivers big air volume to fill fat tire bikes quickly. Low pressure gauge with pressure release button on the hose head lets you adjust tire pressure accurately.
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Page 1 of 6 Next page