Other

Developed in the cold Minnesota weather, Wolf Tooth Singletrack Pogies handle the ever-changing winter weather while keeping hands warm. - Easy hand access - Adjustable cuff allows you to adapt the warmth of the pogie based on the weather conditions and how hard you are working - With the cuffs folded down the hand opening flares open and provides coverage up to your wrist - Velcro, snap, and strap cinch seal around handlebar and cables - Patent-pending design with three distinct warmth settings: Warmest (cuff up, zipped up), Warmer (cuff up, zipper open), Warm or Singletrack Mode (cuff folded down) - Waterproof and durable rip-stop nylon construction Compatibility - Fits most flat bars. The inner diameter of the handlebar should be between 17mm and 20mm. For most carbon bars and lighter aluminum bars, it is helpful to wrap a few layers of electrical tape around the plugs before inserting into the bars and tightening the screws. Tech Specs - Weight: 280g / 20g plugs - Material: 420D Diamond Rip-Stop Nylon laminated with jersey and closed-cell foam. Fabric is waterproof but seams are not waterproof sealed. - Includes: Two Pogies and two durable quick-disconnect handlebar plugs

Set of 8 SKS stainless fender drawbolt/nuts

For riders looking for comprehensive coverage to protect high risk areas of a dual-suspension eMTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed around e-mountain bike geometry - Designed for maximum coverage with minimal trimming - The Covered Dual Suspension eMTB Kit includes protection for toptube, downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet

For riders looking for comprehensive coverage to protect high risk areas of a Road or Gravel frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap, and other elements while out on the trails and roads. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10-year warranty. - Gloss clear film - Fits all makes, models, and sizes - Designed for maximum coverage with minimal trimming - Designed around road and gravel bike geometry - The Covered Road & Gravel Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker-sheet

Fits all makes, models, and sizes. Protect your downtube from harsh tailgate rub maintaining your frames strength and beauty. Made with a high durability urethane and is bonded to your frame with high strength adhesive. Included in the box is one (1) Shuttle Armor and one (1) install cleaning wipe. The Shuttle Armor is removable if needed.

Specific to your model and size. Your Tailored Protection Kit has the highest available coverage on the market thanks to our proprietary design process. Kits are tight to extremities with seams narrow and strategically located. RideWrap Protection Kits are self-healing. This means that minor marks and scuffs will disappear with the warmth of a sunny day. RideWrap doesn’t like dirt. A low surface energy means that less dirt sticks to your bike and adds 10 Hp. RideWrap Protection Kits come with a 10 year warranty against discolouration and cracking. Never requiring removal and always keeping your bike looking great, a Protection Kit is a unique selling point when offloading your ride. Your protection kit weighs only ~50g (frame kit). RideWrap is available in either matte or gloss finish to match your factory paint and is nearly invisible once installed. Looking for a unique style? Be bold and switch up your finish for a factory custom look.

Converts quill style forks to use threadless stems.

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Direct mount version - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube - The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool. - Easy to install in less than 10 minutes. - Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule. - Chain pliers are not compatible with the threadless carrier set up. - The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)

The EDC Tube Strap Mount is a flat mounting bracket with an included OneUp EDC Tension Strap. It lets you carry a spare tube without scratching or scuffing your frame. The strap’s adjustable 355mm length lets you carry other stuff too, and it's replaceable.

Mountain Pogies handmade in the Methow Valley by local Julie Langeberg. Keep your hands toasty on any ride while retaining full dexterity and control of your components, and look extra stylish with unique, one-of-a-kind designs. Ask about custom orders to match your bike or kit!

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

• Disc brake adapter for NCS fenders • Makes NCS fenders better fit disc brake bikes

An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels. Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. Product details - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

Reusable zip ties - 200mm long x 7.4mm wide - 100 pieces

Even the best can be better. The first version of this kickstand had been conceived, designed and manufactured by URSUS in 2005. There wasn’t any similar product, incredibly resistant and aesthetically beautiful, 100% MADE IN ITALY: very soon it became a bestseller and we protected it with an international 20-years patent. We still ship 9 million pieces per year all over the world. After about 10 years, we restyled our bestseller to make it even better by adding an enlarged crank bumper to ensure better protection against impacts, and a bigger foot, designed to easily adapt to any kind of ground surface.

The Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. Kickstand length is 300 mm. BIG FOOT is designed to work with 28" wheeled bicycles. In order to fit this to your bike, you need to check if you have a kickstand plate welded to your bike frame. This can be found just behind the bottom bracket. Comes with an assembly kit that includes alloy plate, conical washer, 4 bolts (75mm, 65mm, 40mm, 22mm). Select the correct bolt length for your bicycle.

The Ursus MOOI 90 Adjustable center-mount kickstand is an alloy kickstand and has the capacity to hold up to 55 lbs. The MOOI is ideal for bicycles with a center mount. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. The maximum load capacity is 25 kg and is suitable for bike wheels between 24" and 29".  Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the Mooi kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 250 grams.

Ursus BIG FOOT center-mount kickstand is an alloy double kickstand and has the capacity to hold up to 110 lbs. Suitable for bikes with extra cargo or a child seat. The plastic feet attached to the BIG FOOT kickstand is extremely strong and prevents the stand from slipping while in use. BIG FOOT is designed to work with 28" wheeled bicycles.

Ursus Easy Rear Mount Adjustable center-mount kickstand has the capacity to hold up to 55 lbs. Tool-free adjustment allows you to set the perfect length for any bike with 26"-28" wheels.

The Elegance aluminum fixed-length kickstand is available in three lengths for different wheel sizes.

Ursus Jumbo Kickstand features a double legged center-mount design that's strong enough to stabilize your bike up to 170 lbs. Ursus Jumbo kickstand is ideal for electric bikes as well as overloaded touring or commuter bikes. The distance between the two legs when legs are expanded is 40cm (15.7").

Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (40 mm PLATE)is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.   Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstay.

Ursus KING EVO R78 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 75 lbs. URSUS KING EVO is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.  Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.

The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike. Intended for bikes with an 18mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.

The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (40 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 40mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. Intended for bikes with an 40mm integrated mount at the rear dropout. 55 lbs capacity. Made in Italy. Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 40mm mounting holes on the rear chainstays.

The Ursus EASY MASTER RT92 Adjustable rear-mount kickstand (w/ oval chainstay mount) is an alloy kickstand with the capacity to hold up to 55 lbs. URSUS EASY MASTER STAY RT92 comes with a mount that fits around an oval chainstay. It is ideal for bicycles that are not designed for center-mount kickstands and feature an oval chainstay. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike.  Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 350 grams.