Electronics

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

Shimano Di2 Frame Junction Box - Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Mount your bike computer directly to your ShockStop Suspension Stem. The ShockStop Computer Mount puts your Garmin, Wahoo, Cateye, Joule, Mio, Magellan, or Polar bike computer in perfect position. Two different mounting positions let you fine-tune the fit of your computer and tuck it out of the wind. Benefits: - Conveniently places your computer directly in front of your stem within easy reach - Two different mounting options let you fine-tune the position of your computer Details: - Fits ShockStop Suspension Stem only (Note: using the computer mount with the +30 degree stem will place the computer in a very upright position in line with the stem) - 2 different mounting positions (upper & lower) Compatibility: - Compatible with Garmin Forerunner QR kits - Compatible with Garmin Edge 1000 in portrait and landscape mode (upper position) and landscape mode only for lower position - Compatible with Wahoo Element and Polar in the upper position only

The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes

- Strong rubber straps securely hold phone - CNC machined aluminum mount - Replaceable rubber strap - Come with 2 sizes of straps to fit most smartphones

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatibility: Wahoo Bolt - Fits Handlebars: 31.8MM - NOT GoPro Interface Compatible - Anodized Color: Black Please contact K-EDGE warranty manager Info@K-EDGE.com for questions or concerns. We highly suggest you follow the recommendations in the Sigma instructions that recommend use of the provided tether leash.

Complete 2 tasks with 1 cable using Garmin's charging/data cable. Connect the cable to your computer's USB port to recharge your compatible device and to transfer data to and from your computer. This cable also pairs with an optional AC adapter (sold separately). Compatible devices: - Approach S60, D2 Charlie, fenix 5/5S/5X, Forerunner 935, quatix 5, quatix 5 Sapphire, vivoactive 3, vivosport

Please note: This is a 2 part system! You need a patch or phone case for VACUUM to work. The best mount ever! Our VACUUM phone mount uses a unique combination of suction and magnets to securely attach your phone to your bike, your car’s dashboard, your desk or your workstation. Your phone can be easily positioned and connected to the mount through the magnetic guidance while the vacuum force keeps it securely locked. Even in the case of a strong impact, the vacuum pressure from the suction cup will hold the phone securely. The centering of the smartphone is ensured by the magnetic force, so the suction power is always guaranteed. The smartphone is released by simply pressing a lever on the side of the phone base. Thanks to the ingeniously simple combination of magnetic force and vacuum pressure, the smartphone can be operated with one hand and is 360° rotatable, while a ratchet prevents it from rotating during a ride - even on roughest of trails! Super lightweight and strong, our phone mounting system consists of a base (available for various applications) and a special, ultra-thin smartphone case with an embedded geometry. The slim case protects the smartphone on and off the base. The understated elegance of our stealthy case with its shock-proof TPU surrounding is accompanied by a stylish as well as practical ratchet and recessed geometry.The soft material on the inside protects the phone’s - For installation on the handlebar - Fits all bar tubes, 22-46?mm - No interference with electronics - Fits all VACUUM cases

Flexible & Versatile The VACUUM handlebar base flex offers a brilliantly simple solution for anyone who wants to keep their smartphone securely in view while cycling. Thanks to the combination of magnetic force and suction, the device stays firmly attached to the handlebars, yet can be easily operated, released, and re-secured with just one hand. The smartphone mount can be installed with just a few simple steps and without the need for tools. This allows the smartphone to be attached to different handlebars in a flexible manner. Therefore, the FIDLOCK VACUUM handlebar base flex is also suitable for attachment to scooters and strollers, in addition to bicycles Simple & Strong The phone can be easily connected to the holder via magnetic guidance and reliably holds the smartphone on the base. When under high pressure, the hold is additionally secured by the force of the suction cup through a vacuum. The centering of the smartphone is ensured by the magnetic force - so the suction force always grips. The smartphone is released by simply operating a lever on the side of the handlebar holder. Safe & Practical Thanks to the ingeniously simple combination of magnetic force and vacuum, the smartphone can be operated with one hand and is rotatable by 360°, while a ratchet prevents it from rotating. In addition to the handlebar base, the magnetic mounting system requires a counterpart that incorporates the appropriate magnet. This can be achieved, for example, through a special ultra-thin smartphone case, a universal patch with an embedded geometry, or an universal waterproof case for the smartphone. The advantages in a nutshell - for installation on the handlebar - fits all bar tubes Ø 40 mm - no interference with electronics - fits all VACUUM cases

The universal case with VACUUM geometry and HERMETIC closure safely protects your smartphone from water, mud and dust on and off the base. Thanks to the patented "just-let-go principle,” the case closes automatically and is fully-hermetic. No manual locking, clicking or pushing. Once snapped onto the VACUUM base, the smartphone is safely protected even on muddy trails. The smartphone is fully functional even in the understated case thanks to the touch-sensitive material and the see-through material that allows taking pictures through the case. Vacuum base is not included. - Size M: max. 6.5 inch phones - Size L: max. 6.9 inch phones - 100 % water and sand proof - Full phone functionality through case - 360° rotatable when mounted - No interference with electronics - Fits all VACUUM bases

Thanks to our universal adhesive patch, any conventional smartphone case can be transformed into a FIDLOCK VACUUM case. The VACUUM geometry is securely attached to any case with the help of an M3 adhesive patch. An included template helps with the correct positioning and application of the patch. Note: a smooth surface is essential for the suction cup to adhere securely. - 360° rotatable when mounted - For mounting to smooth surfaces - Not for mounting to structured surfaces and silicone cases - No interference with electronics - Fits all VACUUM bases

Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)

Light up the road Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Universal Ion Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. - Blendr is an elegant, integrated accessory mounting solution - Clip can be rotated for compatibility with many Bontrager accessories - Works with any Blendr-compatible stem and the accompanying base

Keep your computer and sensors ready for every ride with replacement batteries. Genuine replacement parts. - Don't let a dead battery spoil your ride. - Keep your computer fresh and ready to go with a new battery. - For use with the Bontrager Micro Remote - Sold individually

Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor

Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor

- Replacement parts and accessories for SpeedTrap Digital Speed Sensor - Fork Cap covers SpeedTrap pocket when sensor is removed - Spacer is required on some forks to position sensor closer to wheel magnet

**Only compatible with Service Course, Service Course SL and SL Speed Stems (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. A Hammerhead puck insert is included with each faceplate, making your Karoo 2 unit compatible and secure with the Zipp QuickView Integrated mount. FEATURES -Computer compatibility: Hammerhead, Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.

**Only compatible with SL Sprint Stem (4 bolt)** Zipp’s QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes, system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. The Zipp QuickView Integrated mount will have two variants, one compatible with Service Course, Service Course SL, and SL Speed models, and another designed for use with the SL Sprint. This is an easy way to add elegant integration to your road bike. FEATURES -Computer compatibility: Garmin™, Wahoo™ -Accessory compatibility: GoPro™ -Lights: Niterider Lumina Series™ (with adapter), Light and Motion™, Bontrager™ (with adapter), Gloworm™ (with adapter), Lezyne™ (with adapter), Infini™ (with adapter), Sigma Sport™ -Lifetime warranty

Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS

Telescoping Garmin Computer Mount for Versa Plates. Raise the computer up for Refill Bottles, or lower it down to clear Standard Bottles. On-the-go tilt adjust to avoid glare. - Telescoping computer mount makes for a seamless switch between Refill or Standard Bottle - Compatible with Garmin bike computers and Multisport Watches - Requires Versa Carbon Mount or Versa Aluminum Mount Telescoping Garmin-Specific Computer Mount - Raise the computer mount up to tuck in a Refill Bottle for race day, or seamlessly lower it down for a Standard Bottle to maintain the optimal view for training days. Compatible with Garmin bike computers and multisport watches. On-the-Go Computer Tilt Adjust - Avoid changing glare with a tilt mechanism for easy adjustments while you ride Arrives Fully Assembled - Few steps required to install and head out on your first ride - Weight: 1.9oz (54g) - Construction: Nylon Composite Includes - Fully assembled computer mount - 2 screw sets: one for Versa Carbon Plates, and one for Versa Aluminum Plates Warranty: Limited Lifetime

Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.