Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Wheels Manufacturing Inc. Sealed Bearing Extractor 15mm
$27.50
Wheels Manufacturing Sealed Bearing Extractor - 15mm Fits the following bearings: - 6002 - 6702 - 6802 - 6902 - 15267 - 15268
Wheels Manufacturing Inc. Sealed Bearing Extractor 22mm
$27.50
Wheels Manufacturing Sealed Bearing Extractor for GXP (22mm) bearings Fits: SRAM GPX bottom bracket bearings and other bearings with an inside diameter of 22mm
Wheels Manufacturing Inc. Sealed Bearing Extractor 24mm
$27.50
Wheels Manufacturing Sealed Bearing Extractor for 24 x 37mm bearings Fits: - 2437 (Shimano Hollowtech II-compatible outboard bottom bracket bearings) - Other bearings with an inside diameter of 24mm
Wheels Manufacturing Inc. Sealed Bearing Extractor 30mm
$27.50
Wheels Manufacturing Sealed Bearing Extractor - 30mm Fits: - 6806 - Other bearings with an inside diameter of 30mm
Wheels Manufacturing Inc. Sealed Bearing Extractor 9.5mm
$27.50
Wheels Manufacturing Sealed Bearing Extractor - 9.5mm Fits: - R6 (3/8-inch) bearings - Other bearings with an inside diameter of 9.5mm
Wheels Manufacturing Inc. Double End BB Wrench
$33.95
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit for SRAM DUB Cranks
$39.00
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
Wheels Manufacturing Inc. Headset Cup Drift
$44.95
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
Wheels Manufacturing Inc. Headtube Drift
$44.95
Headset drift for sealed bearing installation press. - Drift is machined with multiple steps to fit common head tube inner diameters - Compatible with bearing presses using 1/2" diameter rod, such as the Wheels Mfg. Headset Cup Press (PRESS-8) - Fits the following headtube inner diameters: 34mm, 44mm, 49mm, and 56mm
Wheels Manufacturing Inc. Bottom Bracket Socket
$54.95
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Wheels Manufacturing Inc. Economy Bearing Press
$57.50
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Wheels Manufacturing Inc. Bushing Removal Tool
$65.00
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
Wheels Manufacturing Inc. Dropout Saver Kit
$67.50
The dropout saver system is an alternative to replacing badly bent or damaged derailleur dropouts. Rather than replacing the damaged dropout completely, simply drill out the damaged threads, install a dropout saver, and realign the dropout. Kit includes: - (1) 15/32-inch reduced shank drill bit - (2) DS-1 wide dropout savers     - (3) DS-2 narrow dropout savers    
Wheels Manufacturing Inc. Wheels Bench Cartridge/Ball Bearing Ruler
$67.50
- Anodized aluminum construction. Includes mounting hardware - Measures the diameter of loose ball bearings - Measures the inner and outer diameter of cartridge bearings - Metric and Standard measurements
Wheels Manufacturing Inc. Universal Bottom Bracket Press
$84.00
This do-it-all universal bottom bracket press is designed to press in all current Wheels Mfg. bottom brackets. Economical and easy to use, this tool is made up of two machined aluminum handles, a 1/2-inch threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters. No more searching for the correct size drifts and parts—just match up the drift to your frame's BB shell size and your bottom bracket's bearing size, and press away. - Zinc-plated 1/2-inch diameter threaded rod resists bending, allowing for the cups to align and press in straight - Drifts can also can be used as a frame bottom bracket shell sizing guide - Machined aluminum handles and drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Works with BB shells up to 132mm wide - Includes two universal BB drifts
Wheels Manufacturing Inc. Professional Universal Bottom Bracket Press
$94.50
Professional, shop-quality, version of the Wheels Mfg Universal Bottom Bracket Press, but with larger handles and brass inserts in the handle faces. Easy to use, this tool is made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. Each drift is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. No more searching for the correct size drifts and parts. Just match up the drift to your frame's BB shell size and your bottom bracket's bearing size and press. 1/2" diameter threaded rod resists bending, allowing for the cups to align and press in straight. Drifts can also be used as a frame bottom bracket shell sizing guide! - Machined aluminum handles and drifts - Brass inserts in the tool faces allow each handle to turn freely against drifts - Red anodized drifts and handles - Steps on drift are marked with diameter sizes - Zinc-plated 1/2" diameter threaded rod - Works with BB shells up to 132mm wide Fits: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm) - 22/24/30mm inner bearing diameters
Wheels Manufacturing Inc. Hub Bearing Installation Drift Set
$95.00
This 23-piece Wheels Mfg. drift set is used to install 10mm and larger inside diameter sealed bearings, using a press with 3/8" diameter rod - Includes open bore and over axle drifts for 6802, 6901, 6902, 6903, 6000, and 6001 bearings - 10mm ID hole, for use with Wheels Manufacturing PRESS-1 or PRESS-4 bearing press handles
Wheels Manufacturing Inc. Headset Cup Press
$137.50
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Wheels Manufacturing Inc. Over Axle Bearing Press Adapter Kit
$199.00
- Works in conjunction with Wheels Mfg sealed bearing press (BTI #WZ-9991) to install 10mm ID and larger bearings into hubs with shouldered axles, always pressing simultaneously on both the inner and outer race of the bearing and preventing damage during the installation process - Includes adapters for 12 different bearing sizes ranging from 10mm to 20mm: 6900,6000 (10mm ID); 6901,6001 (12mm ID); 6802,6902,6002 (15mm ID); 6803,6903,6003 (17mm ID); 6804,6904 (20mm ID) - Made in the USA
Wheels Manufacturing Inc. BBI Shaft Clamp
$205.00
Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm
Wheels Manufacturing Inc. Large Sealed Bearing Press
$357.00
Gone are the days when shop mechanics grabbed whatever socket was close enough to the sealed bearing size and just tapped it in. The PRESS-1 Large Sealed Bearing Press replaces that archaic installation system, providing the right tool for the job. PRESS-1 installs 20 bearing sizes, including today's most common bottom bracket bearings. Also includes linkage offsets for full suspension bearing installation and three speed spacers for faster installs. All parts are laser etched for easy identification. PRESS-1 includes: - T-Handles with 3/8" Acme threaded rod - (3) 30mm "speed spacers" - (2) 20mm frame linkage standoffs - (2) 30mm frame linkage standoffs - 42 pieces total, plus wood storage base - Includes two open bore drifts for the following bearing sizes: 2437, 22x37 (GXP Left), 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904, 1526, 1728, 27.5x37 (SRAM Predictive Steering)
Wheels Manufacturing Inc. Sealed Bearing Press
$357.00
- Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 - Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 "speed spacers" and 2 linkage offsets for full suspension bearing installation - Made in the USA
Wera 667/1 IP Torx Plus Bit
$3.73
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm
Wera 950 SPKL L-Key Hex Wrench
$3.95 - $8.55
High-quality Wera L-keys with color-coded, convenient plastic sleeve. The tool is quickly accessible and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The Hex-Plus profile offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. The ball-end on the long arm allows for reliable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. The tools are quickly to hand thanks to the laser-engraved and thereby wear-resistant size markings on the L-keys. - L-keys for hexagonal socket screws - Hex-Plus allows socket head screws to live longer - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Hexagonal ballpoint on the long arm - Wear-resistant size marking
Wera 354 Hex Driver
$4.04 - $7.78
High-quality Kraftform Plus screwdriver. Multi-component Kraftform handle for fast and low-fatigue working. Kraftform Plus: hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Hex-Plus offers a larger contact surface within the screw head. This reduces the notching effects to a minimum and almost completely eliminates the risk of destroying the screw recess. "Take-it-easy" Tool Finder: color coding according to profile and size. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Hexagonal screwdriver hex-plus - Multi-component Kraftform handle for fast and ergonomic screwdriving - Take-it-easy tool finder: color coding according to profile and size - Hex-plus allows socket head screws to live longer - Hexagonal anti-roll feature against rolling away
Wera 352 Hex Ball End Screwdriver
$5.40 - $7.53
High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Hexagonal ball point screwdriver - Multi-component Kraftform handle for fast and ergonomic screwdriving - "Take-it-easy" tool finder: color coding according to profile and size - Hexagonal blade and ballpoint for secure working even in difficult installation situations - The Wera Black Point tip offers an exact fit and optimum corrosion protection
Wera 840/1 DC Impaktor Hex Bit
$5.46 - $10.78
High quality Impaktor bits for hexagon socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Hex-Plus ensures a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head is more or less eliminated. - For socket head screws - Impaktor technology for above-average service life - Particularly suitable for use with customary impact drivers - Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out - Take it easy tool finder: color coding according to profile and size
Wera T-handle Screwdriver Hex-Plus
$8.53 - $22.50
T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool
Wera 840/4 Impaktor Hex Bit
$10.78
High-quality Impaktor bits for hexagonal socket screws. The Impaktor technology offers an above-average service life even under extreme circumstances. Enhanced friction resistance, thanks to the rough diamond-particle coating on the bit tip, prevents any slipping out of the screw head. Hex-Plus ensures a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. - For socket head screws - Impaktor technology for above-average service life - Particularly suitable for use with customary impact drivers - Diamond coating for a secure fit in the screw, literally bites into the screwhead to prevent cam-out - Take-it-easy tool finder: color coding according to profile and size
Wera Joker Ratcheting Combination Wrench
$27.01 - $33.74
High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size